Showing 1–48 of 50 results

Ultraflex Wallscapes Wallcovering XL

$2,376.71$3,715.00
Wallscapes™ XL is a quality, durable, flexible material with a blue-back used for wallcoverings and upscale banner applications. The blue backside provides a bright white point with a wide color gamut. The material is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. Wallscapes XL may be installed with commercial grade adhesives, sewn or attached with grommets. The material is available in wide widths reducing the amount of seams and installation time for finishing graphics. Available in 126” and 196” widths.

Ultraflex UltraPoplin PES S240

$282.00$1,947.05
UltraPoplin® PES S240 is a 7.1 oz., 100% knitted polyester that is bath coated with out Universal coating. The coating technique allows for printing with solvent, eco-solvent, UV, screen printing, and Latex inks. The poplin is able to be stretched, making it ideal for expanding over frame systems and structures. UltraPoplin® PES S240 is crease and wrinkle resistant and is ideal for use with trade show graphics. Available in widths from 54” -198”.

Ultraflex UltraMesh Supreme 9oz

$517.67$1,830.15
UltraMesh® Supreme is a 9 oz. coated, polyester scrim, mesh banner material. The material allows 25% air-flow through and is designed with slit-like holes for enhanced image quality. It is ideal for small text or close proximity viewing. UltraMesh® Supreme may be printed using eco-solvent, solvent, UV, screen printing and Latex inks on printers using mesh kits. Available in 126” and 196” widths.

Ultraflex FloorFlex Plus

$918.41$1,460.17
FloorFlex® Plus is a printable floor vinyl suitable for UV and Latex printers. The material is engineered with a non-slip Latex backing and is ideal for indoor use such as corporate lobbies, waiting areas, foyers, tradeshow booth floor graphics, catwalks and various types of promotional events. FloorFlex may be used outdoors for short durations. Available in widths of 78″ and 124″.

Ultraflex Pole Banner Blockout-18oz

$258.37$1,427.24
Pole Banner Blockout 18 oz. is a heavy duty blockout banner material for indoor or outdoor applications. Its uniquely woven 1000 x 1000 scrim provides strength and stability under harsh weather conditions. Pole Banner 18 oz. is designed for two-sided applications where complete opacity is required. Both sides of the material have a matte finish and are compatible with solvent, eco-solvent, screen printing, Latex and UV inks. Available in widths from 38” -196”.

Ultraflex Vulite Supreme BL 15oz

$1,114.00$1,300.00
Vulite® Supreme BL is a 15 oz. high-end, back-lit substrate used for indoor or outdoor sign and billboard applications. The coating gives the material greater strength and resistance to cold and wind. The slight blue hue allows bright white lights to diffuse the scrim pattern allowing exceptional image quality. Vulite® Supreme BL has a matte finish and is compatible with solvent, eco-solvent, UV, screen printing and Latex inks. Available in widths of 126” and 196”.

Ultraflex Vulite Pro BL 15oz

$325.90$1,247.79
Vulite® Pro BL is a 15 oz. economical, back-lit substrate used for a wide array of illuminated indoor or short-term outdoor applications. The smooth print surface has been engineered to avoid flow marks when back-lit. Vulite® Pro is available in a matte and gloss finishes and is compatible with solvent, eco-solvent, screen printing, UV and Latex inks. Available in widths from 54” – 196”.

Ultraflex UltraMesh Eclipse

$150.00$1,196.02
UltraMesh® Eclipse® is a 7.96 oz. polyester, black-backed mesh. The material is ideal for applications where complete opacity is required. UltraMesh Eclipse is UV printable and may be used for building wraps and fence graphics. Available in widths of 126” and 196”.

Ultraflex VorTex Bolero S225

$482.37$1,126.51
VorTex™ Bolero S225 is a 6.5 oz. woven polyester fabric. The bright white fabric enriches colors, producing vivid eye-catching images. VorTex Bolero S225 may be used for a wide range of applications including light boxes, POP displays, backlit displays/frames, indoor banner displays and roll up displays. The material is compatible with solvent, eco-solvent, UV and Latex printing. VorTex Bolero S225 is fire resistant and is available in widths from 54” –126.”

122″ x 164′ UltraCanvas Backlit D280/U280

$950.00
UltraCanvas® Backlit D280 is an 8.3 oz. 100% woven polyester back-lit textile. It is made from 20% recycled polyester. A unique color exaggerating technology has been incorporated into the coating, producing flawless and high quality images when back-lit. UltraCanvas Backlit D280 has an antistatic coating and less than 1% shrinkage when printed and applied. It is primarily used in UV or Dye Sublimation printing. Available in 98” and 122” widths.

Ultraflex Normandy Pro FL 13oz

$368.32$924.71
Normandy® Pro FL is a premium 13 oz. banner or billboard material. The material is compatible with solvent, eco-solvent, UV, Latex, and screen printing. With 1000 x 1000 high tenacity yarn construction, this product is one of the strongest 13 oz. substrates available. Normandy Pro FL has a unique face film that produces vibrant and consistent prints and is available in matte finish. Available in widths from 98” – 196”. In widths of 80” and below, the product is called JetFlex® FL.

Ultraflex AquaFlex (63″ x 75′)

$920.71
AquaFlex® is a solvent, UV, UV screen printing and Latex printable substrate designed for underwater branding and advertising for pools, ponds, water features and aquascapes. To protect inks underwater, UV liquid lamination is recommended. Once printed, AquaFlex® may be positioned easily by hand or with a pool brush with no need to drain the water. The product is engineered to lay flat and remain in position without the use of tape or adhesive. AquaFlex® is made in the USA and is recyclable. The blue backside of AquaFlex® is made from recycled industrial pool liner. AquaFlex is available in 63” wide face-out rolls.

Ultraflex SuperPrint Plus FL 13oz Matte

$130.00$864.24
SuperPrint® Plus FL is a 13 oz. front-lit billboard and banner material. It is compatible with solvent, eco-solvent, UV and screen printing. The face-film provides exceptional ink receptivity and consistently prints from batch to batch. SuperPrint® Plus is available in matte and gloss finishes and is available in widths from 38” – 196”. The material also comes in 492’ rolls specifically engineered for HP Turbojet and screen-printing machines. The rolls are available in 38”, 54”, 63” widths and are wound face-out on a 3” core.

Ultraflex SuperPrint Plus Eclipse FL 13oz

$502.17$857.22
SuperPrint® Plus Eclipse® FL is the black-backed version of our SuperPrint® Plus FL. The 13 oz. material is engineered for open-framed billboard systems or any application where complete opacity is required. The material is available in a matte finish. SuperPrint® Plus Eclipse® has all the features of SuperPrint® Plus including a 1000 x 1000 scrim construction which not only makes it strong but also allows the material to lay flat when tensioned around a billboard. Available in widths from 126” – 196”.

UltraFlex MultiTex S285 Canvas

$265.00$850.00
MultiTex® S285 is a multi-purpose canvas made from 100% polyester spun yarn. The unique construction and coating make it an economical choice for fine art reproduction, indoor displays, wall murals and other art decor applications. MultiTex® S285 may be stretched and framed. Available in widths from 39”- 126”.

Ultraflex SuperSmooth PET Blockout 15oz

$253.47$840.34
SuperSmooth™ PET Blockout is a 15 oz. smooth, scrimless, blockout banner material. This media is engineered primarily for indoor use and has a no curl formula giving it a lay-flat appearance without having to use hemming tapes. The blockout layer in SuperSmooth™ PET Blockout is made of matted PET, which allows for easier separation during the recycling process. It is best suited for double sided signs and banners that hang or are installed in banner stands. Available in widths from 38″ – 126”.

Ultraflex AdventureScapes High Tac

$405.38$810.77
AdventureScapes is a 100% polyester, anti-microbial, adhesive backed material with an anti-slip embossment. The product is ideal for wayfinding, floor graphics, decals in indoor and outdoor applications. AdventureScapes is tear and wrinkle resistant with an excellent anti-slip rating for wet and dry surfaces. The material does not shrink after printing and is engineered with a quick-drying surface that does not require lamination. AdventureScapes is solvent, eco-solvent, UV & Latex printable. Available in 54” widths.

Ultraflex Wallscapes Plus

$200.18$800.71
Wallscapes™ Plus are commercial grade type II wallcoverings. The materials are quality, durable, flexible materials used for wallcoverings and upscale banner applications. The material is available in four embossment finishes: Bali Hai, Matte, Stardust and Suede. Wallscapes Plus materials are compatible for use with solvent, eco-solvent, UV, Latex and screen printing. Materials may be installed with commercial grade adhesives, sewn or attached with grommets. All materials are available in standard 54″ widths.

Ultraflex Ultima Pro FL 13oz

$147.00$759.00
Ultima® Pro 13 oz. FL Matte is a smooth, versatile 13 oz. front-lit banner material. It has a unique construction making it ideal for outdoor banner and truck-side applications. Ultima® Pro 13 oz. FL Matte provides an excellent option for print­ers looking for a strong, high quality, cross-functional substrate. It is compatible with solvent, eco-solvent, UV, Latex and screen printing. Available in widths from 38”- 196”.

UltraFlex Wallscapes Wallcovering

$296.91$756.00
Wallscapes™ are commercial grade type II wallcoverings. The materials are quality, durable, flexible materials used for wallcoverings and upscale banner applications. Wallscapes materials are compatible with solvent, eco-solvent, UV, Latex and screen printing. Materials may be installed with commercial grade adhesives, sewn or attached with grommets. All materials are available in standard 54″ widths.

Ultraflex Pole Banner Select 18oz

$224.92$745.63
Pole Banner Select is a double-sided, durable, blockout banner material designed for indoor or outdoor applications. The material offers a matte finish and is ideal for applications where complete opacity is required. Pole Banner Select is compatible with solvent, eco-solvent and UV ink. Available in widths from 38” – 126”.

Ultraflex DSS 12oz Blockout

$149.51$742.61
DSS 12 oz. Blockout is a 12 oz. smooth, two-sided blockout banner material that delivers similar quality printing results on both sides. DSS 12 oz. Blockout is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. It is best suited for indoor applications where complete opacity is required. With its unique, low-curl formula and lay-flat appearance, DSS 12 oz. Blockout is ideal for pop-up or scrolling banner stands, trade show and events graphics, POP, and any hanging banner or sign. Available in widths from 38” – 126”.

Ultraflex DSS Pro 13oz Blockout

$217.34$720.88
DSS 13 oz. Pro Blockout is a two-sided, blockout banner material with a smooth surface. The material offers a broad color gamut with low ink consumption and is ideal for application where complete opacity is required. The material is compatible with solvent, eco-solvent, UV and screen printing. Available in widths from 38” – 126”.

Ultraflex IllumiSol BL Film 8.5oz

$448.95$714.60
IllumiSol® BL Film is an 8.5 mil PET film coated on one-side for solvent, eco-solvent and UV printing. IllumiSol’s® unique base film and quick-drying glossy top coat were specifically designed for superior light diffusion resulting in vivid backlit graphics. The back-side of IllumiSol® has a unique lacquer which prevents ink transfer when rolled after printing. Available in widths from 54”-86” on face-out rolls.

Compatibility: Solvent, Eco-Solvent, UV Inks 

Ultraflex FabriTac

$409.69$703.15
FabriTac® is a removable, adhesive fabric that may be mounted to any surface and repositioned countless times. FabriTac® will retain its adhesion and leaves no residue. FabriTac® has a unique coating which is quick drying and water resistant. It provides superb quality, color gamut and resolution with solvent, eco-solvent, UV and Latex inks. FabriTac® is designed with unique opaque properties which prevents translucency problems associated with comparable products. Available in widths from 42” – 60”.

Ultraflex ProFlex 12oz Blockout (6″ Core)

$650.00$700.00
ProFlex DSS 12 oz. Blockout is a 12 oz. smooth, two-sided blockout banner material that delivers similar quality printing results on both sides. ProFlex DSS 12 oz. Blockout is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. It is best suited for indoor applications where complete opacity is required. With its unique, low curl formula and lay flat appearance, ProFlex DSS 12 oz. Blockout is ideal for pop up or scrolling banner stands, trade show and events graphics, POP, and any hanging banner or sign.

Ultraflex SuperSmooth PET Backlit

$295.87$689.91
SuperSmooth™ PET BL is a 13.5 oz. smooth, scrimless, flat banner material. It is best suited for backlit light boxes. It is compatible with solvent, eco-solvent, UV and screen printing. With its curl-free and super flat characteristics, SuperSmooth™ PET Backlit is ideal for any indoor or outdoor backlit applications. Available in widths from 54” – 126”.

Ultraflex Speaker Mesh 7oz

$407.28$684.88
Speaker Mesh is a 7 oz. PVC coated polyester mesh. Speaker Mesh is printable on two-sides using solvent, eco-solvent, and UV inks. The large-holed mesh allows 70% air-flow through. It is designed with a special scrim pattern that runs through the open holes catching more ink for optimal ink coverage. Speaker Mesh is best suited for acoustical applications (over concert/venue speakers), enormous images on building/stadium wraps, murals, protective barriers for scaffolding. It is well-suited for theatrical and TV backdrops. Available in seamless wide-widths of 126” and 196”.

Ultraflex VorTex Flag D110

$334.28$668.45
VorTex™ Flag D110 is a knitted flag fabric treated specifically for direct dye-sublimation, Latex, dye-sublimation transfer and UV printing. VorTex™ Flag D110 offers excellent bleed through and wind flow characteristics making it an ideal choice for flag displays and temporary outdoor banners. VorTex™ Flag D110 is fire resistant and available in widths of 126”.

Ultraflex SuperSmooth PET Greyback 13oz

$198.66$658.95
SuperSmooth™ PET GreyBack is a non-curling banner with a super smooth print surface and a grey back. It is ideal for high resolution printing. The grey back-side prevents light transparency and shadowing. SuperSmooth™ PET GreyBack is ideal for pop-up, roll-up, X displays, and an array of close viewing indoor applications. The material does not require lamination and is available in a matte finish. Available in widths from 38″ – 126”.

Ultraflex UltraMesh Plus 8oz

$415.00$650.00
UltraMesh® Plus is an 8 oz. coated, polyester scrim, mesh banner material. The economical light weight material allows 37% air-flow through making it ideal for buildings, stadiums and fence wraps. UltraMesh® Plus may be printed on one side using solvent, eco-solvent, screen printing, latex and UV inks on printers using mesh kits. The product is available with a PVC backer that peels off after printing called Strip Mesh Plus. Available in 126″ and 196″ widths.

Ultraflex Ultrablockout Banner Pro 15oz

$272.35$634.99
UltraBlockout® Banner Pro 15 oz. is a blockout banner material with a uniquely constructed dual print surface. UltraBlockout® Banner Pro 15 oz. is engineered for high resolution, two-sided printing. It is ideal for any indoor application where opacity is required. Like our 20 oz. version, UltraBlockout® Banner Pro 15 oz. works with solvent, eco-solvent, UV, screen printing or Latex inks. Available in widths from 54” – 126”.

StripMesh Pro LTX w/Liner – 9oz

$268.63$626.81
Strip Mesh Pro LTX is a 9 oz. mesh with backer that may be easily removed after printing. The specially designed backer creates an air-tight print surface preventing ink spray through and allows vacuum equipped printers to hold material flat during printing. The backer is formulated to work with solvent, eco-solvent, UV, Latex and screen printing. Strip Mesh Pro LTX allows 25% air-flow through and is ideal for outdoor banners, building wraps, fence mesh graphics and boulevard banners in high wind areas. Available in widths from 54″ – 126”.

Ultraflex StripMesh Plus 8oz

$251.51$586.95
Strip Mesh Plus is an 8 oz. coated, polyester scrim, mesh banner material with a PVC backing. The backer creates an air-tight print surface to prevent ink spray through while helping to feed the material through the printer. The backer is easily removed after printing. Like UltraMesh® Plus, the material allows 37% air-flow through and is ideal for banners, protective barriers and fence wraps. Strip Mesh Plus is compatible with solvent, eco-solvent, screen printing and UV inks. Available in widths from 54” – 126”.

Ultraflex Signetics Select

$391.96$537.02
Signetics® Select is offered in three sizes to allow for seamless installation and increased throughput. The material has been designed with a smooth backside which eliminates scratches on prints when stacked or rolled. Signetics® Select is ideal for high-traffic environments and is compatible for use with solvent, eco-solvent and UV inks. Available in roll sizes of 54”, 60” and 74” in lengths of 164’.

DSS 15oz Blockout Banner Vinyl

$250.00$520.00
DSS 15 oz. Blockout is a 15 oz. smooth, two-sided blockout banner material that delivers similar quality printing results on both sides. DSS 15 oz. Blockout is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. It is best suited for indoor applications where complete opacity is required. With its unique, low-curl formula and lay-flat appearance, DSS 15 oz. Blockout is ideal for pop-up or scrolling banner stands, trade show and events graphics, POP, and any hanging banner or sign.

63″ x 164′ Ultraflex T130 Dye Sub Fabric

$500.00
VorTex Backlit Precision T130 is a polyester fabric ideal for use with retail applications. The product is designed and coated to hold a high resolution and wide color gamut. VorTex Backlit Precision was engineered with a unique coating that prevents color distortion due to cracking if the fabric is creased. The print surface allows for rich and uniform saturation resulting in vivid back-lit graphics through transfer dye-sublimation printing. VorTex Backlit Precision T130 currently available in widths of 63”.

Ultraflex Signetics Duo

$442.00$492.00
Signetics Duo Signetics Duo is printable on two-sides allowing two graphics to be printed simultaneously and changed in an instant! The material is compatible with an existing magnet and requires no professional installation. The double sided capability will significantly reduce material cost, freight and installation fees as the material is easily rolled up, turned over and rolled back to the surface. Signetics® Duo is compatible with solvent, eco-solvent,UV and Latex inks. Available in roll sizes of 54” and 60” in 115’ lengths.

Ultraflex SuperPrint Plus FL 13oz Gloss

$135.00$490.55
SuperPrint® Plus FL is a 13 oz. front-lit billboard and banner material. It is compatible with solvent, eco-solvent, UV and screen printing. The face-film provides exceptional ink receptivity and consistently prints from batch to batch. SuperPrint® Plus is available in matte and gloss finishes and is available in widths from 38” – 196”. The material also comes in 492’ rolls specifically engineered for HP Turbojet and screen-printing machines. The rolls are available in 38”, 54”, 63” widths and are wound face-out on a 3” core.

Ultraflex ProFlex FL 13oz

$127.01$422.06
ProFlex™ is a 13 oz. front-lit banner material designed to be the economical alternative to Normandy® Pro and JetFlex®. ProFlex™ was formulated for enhanced Latex printability and has a bright white point. The material is compatible for use with solvent, eco-solvent, UV and Latex ink. ProFlex™ is available in widths ranging from 38” – 126”. *Grey backside is available by special request.

Ultraflex UltraVision Window Perf

$265.23$400.88
UltraVision Window Perf – UV is a perforated white gloss calendared graphic window film with a black adhesive backside, a paper backer and a unique additional center release liner. The release liner catches the ink while printing; preventing the ink from clogging the perforated holes. It is ideally used for exterior mounted window advertisements, in store, building windows or on vehicle windows. UltraVision UV has a specified open area (ie: 60/40: 40%) for optimal two-way viewing and can be printed on the front, non-adhesive side with solvent, eco-solvent and UV inks. For best installation results, an edge sealer should be used to help prevent the edges lifting after installation. 

Ultraflex Signetics LTX

$349.99$388.84
Signetics® LTX offers universal print compatibility with enhanced engineering for use with Latex inks. The material offers superior ink adhesion creating flawless graphics. Signetics® LTX is compatible with solvent, eco-solvent, UV and Latex inks. Available in roll sizes of 54” and 60” in 115’ lengths.

Ultraflex JetFlex FL 13oz

$66.98$300.00
JetFlex® FL is a premium 13 oz. front-lit banner material. It is compatible with solvent, eco-solvent, UV and Latex inks. Made with the same face-film as Normandy® Pro, JetFlex® prints vibrantly and consistently from batch to batch. Its 1000 x 1000 high tenacity polyester yarn give it strength and superior print quality making it the preferred 13 oz. banner material among print manufacturers and industry-leading printing facilities. JetFlex® is available in matte and gloss finishes in widths ranging from 30” – 80”. In widths of 98” and above, this product is called Normandy® Pro FL.

DSS Pro 14oz Blockout

$249.44$290.59
DSS Pro 14 oz. Blockout is a two-sided, blockout banner material that is smooth and printable on both sides. The refined scrim pattern and dual print surfaces of the DSS Pro 14 oz. were engineered for users seeking a media with a large color gamut at high speeds with low ink consumption. DSS Pro 14 oz. has a low-curl formula that is ideal for roll-up banner stands, POP and indoor hanging graphics. Available in widths from 39” to 80”.

Ultraflex UltraBanner FL 10oz

$85.59$239.72
UltraBanner® FL is a 10 oz. front-lit, smooth banner material best suited for indoor applications. Its unique construction provides a smooth surface that prints consistently from batch-to-batch, making it ideal for high quality, POP graphics. UltraBanner’s® light weight construction is easy to install and works with a variety of indoor display systems. The material is compatible with solvent, eco-solvent, UV, and screen printing. UltraBanner® FL is available in matte and gloss finishes. Available in widths from 30” – 80”.