Kapco Powertape 1 1/2″x36 Yards

• Single-sided tape with super strong film
• No need to fold the hem so there is no risk of unfolding
• Apply PowerTabs™ First–Then apply PowerTape™ over PowerTabs–PowerTabs will not adhere to PowerTape because of its silicone release coating!
• Clamp or tape both ends of banner with slight tension to remove wrinkles
• Apply along top and bottom back edge of the banner–four-sided application not recommended
• It is better to leave 1/8” to ¼” space between edge of tape and banner
• Apply tape corner to corner–adding evenly distributed strength to banner–covering the PowerTab holes
• Pull off an arms length of tape at a time
• Primarily for use with outdoor banners
• Will reduce edge curl on vertical indoor banners
• Can be used with or without PowerTabs but only recommended without when using for indoor applications; PowerTape has only moderate strength when used by itself, but tremendous strength when used with PowerTabs
• Recommended for banners in excess of 8’ or where maximum wind resistance is needed
• Dissolve PowerTape silicone release coating by gently rubbing the tape film with a rag dampened in nail polish remover

PRODUCTS FOR APPLICATION

• Indoor/Light Duty Outdoor–PowerTabs with Rope attached through the Corner Loop or Mini Power Tabs
• Heavy Outdoor–banners up to 8’–PowerTabs with Rope through Center Hole
• Maximum Strength–PowerTabs & PowerTape