Showing 529–544 of 1794 resultsSorted by price: high to low

Show sidebar
Kala Laminator Accessories
Compare

KALA Laminator Accessories

Call For Price

Accessories for KALA Mistral, Arkane & Atlantic Laminators include the following:

  • AX165076 Shaft 65" - 1,65 m Ø 76 mm/3" - Mistral 1650
  • AX210076 Shaft 83" -2,10 m- Ø 76 mm/3" - Mistral 2100
  • MP601840 Anti-static wire w/ magnets for 1650
  • MP621840 Anti-static wire w/ magnets for 2100
  • ILCT1650 In Line Cutter with Output Table
  • ILCM1650 Additional cutting blade holder (one unit)
  • ILCA1650 In Line Cutter for Atlantic
  • ILCMA Additional cutting blade holder (one unit) for Atlantic
  • REMOTE Remote control for Mistral, Arkane & Atlantic
Placeholder
Compare

Drying fan case left SERV

$1,119.50
A photo of a roll of General Formulations product. Used for: GF 100 GF 101 GF 102 GF 103 GF 105 GF 106 GF 107 GF 108 GF 109 GF 110 GF 111 GF 112 GF 113 GF 114 GF 116 GF 117 GF 118 GF 160 GF 205 GF 206 GF 213 GF 264HTR GF 400 GF 401
Compare

GF 117 1.0 Clear Polyester Permanent Adhesive with 1.5 mil PET liner

Price range: $558.78 through $1,117.53

GF 117 is a double-coated pressure sensitive 1.0 mil clear polyester film with a high-tack permanent adhesive on one side and a high-tack removable adhesive on the opposite side. GF 117 has a 90# air-egress on the removable adhesive side. The air-egress liner assures smooth bubble-free application (NOTE: Air-egress adhesives are DRY APPLY ONLY). This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The high-tack permanent (HTAP) adhesive is protected by a 1.5 mil clear polyester liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

This product has multiple variants. The options may be chosen on the product page
Compare

63″ x 75′ Ultraflex AquaFlex

$1,113.84

AquaFlex® is a solvent, UV, UV screen printing and Latex printable substrate designed for underwater branding and advertising for pools, ponds, water features and aquascapes. To protect inks underwater, UV liquid lamination is recommended. Once printed, AquaFlex® may be positioned easily by hand or with a pool brush with no need to drain the water. The product is engineered to lay flat and remain in position without the use of tape or adhesive. AquaFlex® is made in the USA and is recyclable. The blue backside of AquaFlex® is made from recycled industrial pool liner. AquaFlex is available in 63” wide face-out rolls.

Compare

Royson DreamScape Rave 20oz

Price range: $547.50 through $1,096.50

Rave brings color and action to your wall in a way no other wallcovering can. It spans the entire spectrum depending on viewer perspective, angle and ambient lighting.  It’s sure to add unprecedented life and light to your space and leave a lasting impression.

This product has multiple variants. The options may be chosen on the product page
Compare

Roysons DreamScape Limelight 20oz

Price range: $532.50 through $1,096.50

Limelight covers the entire color spectrum at any angle via an ultra-fine diamond pattern.  It reflects light and color based on viewing angle and interacts with ink from beneath.  Create truly one-of-a-kind designs with this unique wallcovering material.

This product has multiple variants. The options may be chosen on the product page
Compare

Roysons DreamScape Déjà Vu 20oz

Price range: $547.50 through $1,096.50

Deja Vu employs the ‘fractal lens’ effect to create movement based on perspective and lighting.  It’s extremely reflective and interactive with the viewer.  Create amazing designs with opaque white ink or translucent inks to give your guests something to talk about.

This product has multiple variants. The options may be chosen on the product page
Placeholder
Compare

L1Q41-67066

$1,089.28

FB550/750 Media Thickness Sensor (FRM,MEDIA_THKNSS_SNSR,V)

Compare

54″ x 150′ MACtac StreetRAP PSA Vinyl

$1,086.18

Adhesive Category: High Tack
Adhesive Type: Permanent BlendBrand: IMAGinBrand Name: IMAGinColor: White
Dimensions: 54" x 150'
IMAGin StreetRap is a 4.0 mil print media film designed for short-term outdoor sidewalk graphic applications on concrete, asphalt and other smooth to moderatly textured surfaces.

Compare

Roysons DreamScape Terralon Smooth 13oz

Price range: $286.50 through $1,084.50

Terralon Smooth- the Earth’s best wallcovering!

This revolutionary wallcovering media from the makers of Dreamscape, is an industry leading eco-friendly alternative material. Terralon Smooth has a very flat surface compared to our standard Terralon.

Contains 31% post consumer recycled content. Product contains NO PVC, NO LEAD, NO PLASTICIZERS, NO HEAVY METALS.  Contributes to several LEED credits. Terralon can be printed with UV curable, solvent, eco-solvent, or Latex digital inkjet technology. Terralon is also highly “breathable”, meaning that water vapor can transfer freely through the material which aids in the prevention of mold.

Terralon will print with the same consistency and flawless reproduction as other DreamScape media. No special profiles or installation techniques required.

This product has multiple variants. The options may be chosen on the product page
Compare

Roysons DreamScape Terralon 13oz

Price range: $286.50 through $1,084.50

Terralon – the Earth’s best wallcovering!

This revolutionary wallcovering media from the makers of Dreamscape, is an industry leading eco-friendly alternative material.  This version of Terralon is the original product with a light stipple type texture.

Contains 31 percent post consumer recycled content. Product contains NO PVC, NO LEAD, NO PLASTICIZERS, NO HEAVY METALS.  Contributes to several LEED credits. Terralon can be printed with UV curable, solvent, eco-solvent, or Latex digital inkjet technology.   Terralon is also highly “breathable”,  meaning that water vapor can transfer freely through the material which aids in the prevention of mold.

Terralon will print with the same consistency and flawless reproduction as other DreamScape media. No special profiles or installation techniques required.

This product has multiple variants. The options may be chosen on the product page
Roysons DreamScape Terralon Regatta
Compare

Roysons DreamScape Terralon Regatta 13oz

Price range: $286.50 through $1,084.00

Terralon Regatta – the Earth’s best wallcovering!

This revolutionary wallcovering media from the makers of Dreamscape, is an industry leading eco-friendly alternative material.  Regatta brings a light canvas texture to the Terralon family.

Contains 31 percent post consumer recycled content. Product contains NO PVC, NO LEAD, NO PLASTICIZERS, NO HEAVY METALS. Contributes to several LEED credits. Terralon can be printed with UV curable, solvent, eco-solvent, or Latex digital inkjet technology. Terralon is also highly “breathable”, meaning that water vapor can transfer freely through the material which aids in the prevention of mold.

Terralon will print with the same consistency and flawless reproduction as other DreamScape media. No special profiles or installation techniques required.

This product has multiple variants. The options may be chosen on the product page
Compare

Avery MPI1105 Easy Apply RS LTR

Price range: $476.44 through $1,058.77

MPI 1105 Wrapping Series
Fleet branding. Signage. Vehicle wraps.

MPI 1105 wrapping film series is a premium high-gloss cast film with superior 3D conformability, stunning printability and maximum durability for complex surfaces with curves and recesses. With a lower initial tack, MPI 1105 uses Easy Apply™ RS technology to ensure the same application speed and convenience as Avery Dennison® Supreme Wrapping Film.

Businesses of all sizes enjoy the vibrant color pop and high quality output across a wide-range of applications including fleet branding and signage to amplify their brand messaging. To protect MPI 1105 series and enhance both colors and durability, we recommend using it in combination with DOL Z Series or DOL 6460 overlaminates.

This product has multiple variants. The options may be chosen on the product page
Compare

Avery DOL6460 Gloss PET

Price range: $952.63 through $1,058.48

Uses:
Avery Dennison DOL 6460 Clear Gloss Polyurethane
is a premium quality, flexible film designed for use as
a protective overlaminate film for screen and digitally
printed decals. DOL 6460 offers exceptional value
for applications requiring abrasion resistance,
conformability, and color durability. The gloss film
features a synthetic liner that creates a super smooth
high gloss finish which provides an overall paint like
finish of printed graphics.

This product has multiple variants. The options may be chosen on the product page
Placeholder
Compare

HP Scitex FB500/FB700 Trolley Assembly

$1,056.80

Trolley Assembly (upper and lower plates)-For the Scitex FB500/FB700 printer. 

A photo of a roll of General Formulations product. Used for: GF 100 GF 101 GF 102 GF 103 GF 105 GF 106 GF 107 GF 108 GF 109 GF 110 GF 111 GF 112 GF 113 GF 114 GF 116 GF 117 GF 118 GF 160 GF 205 GF 206 GF 213 GF 264HTR GF 400 GF 401
Compare

GF 116 1.0 Clear Polyester Removable Air Egress Print Mounting Film

Price range: $558.78 through $1,054.28

GF 116 is a double-coated pressure sensitive 1.0 mil clear polyester film with a high-tack permanent adhesive on one side and a high-tack removable adhesive on the opposite side. GF 116 has a 4.5 mil clear air-egress PET liner printed with “Remove to Expose Adhesive” on the removable adhesive side.

The air -gress liner assures smooth bubble-free application (NOTE: Air-Egress adhesives are DRY APPLY ONLY). The clear liner allows the graphics to be viewed after lamination with GF 116.

This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The high-tack permanent (HTAP) adhesive is protected by a 1.5 mil clear polyester liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.

This product has multiple variants. The options may be chosen on the product page