Shop
Showing 1025–1040 of 1794 resultsSorted by price: high to low
GF 105 2.0 mil High Gloss Clear Polyester Laminate
GF 105 is a 2.0 mil high gloss laminate with an optically clear permanent acrylic adhesive on a 1.5 mil polyester film liner. This polyester film offers protection from abrasion, moisture and other environmental exposures. It is laminated by the cold laminating process without the addition of heat. GF 105 is ideal for artwork and indoor graphics where a high gloss finish is required.
Mactac PERMACOLOR TL2000 High Gloss
Permacolor thermal overlaminating films are high quality, low temperature, heat activated films designed for the overlamination and encapsulation of graphic images. Permacolor protects the image from harmful ultra-violet (UV) light, moisture, dirt, oils and other potential contaminants. The use of Permacolor on one or two sides lends body
to the image for easier handling and display. TL2000 Series is a family of clear, glossy PET films with a heat activated, polymeric adhesive on one side. The use of TL2000 lends depth and vibrancy to underlying images. Stiffness of the laminated image will vary with the Permacolor thickness selected as well as whether or not it is used on both sides. The thicker products provide maximum protection.
GF 240 – AutoMark 2.4 mil Matte Clear UV Wrap Laminate w/Permanent Adhesive
GF 240 is a premium 2.4 mil calendered matte UV clear laminate with a clear permanent acrylic adhesive on a 53# PE coated kraft liner. This laminate offers protection from ultra violet radiation, moisture and other environmental exposures.
It can be laminated by using a cold laminating process without the addition of heat and is intended to be paired with GF 230 AutoMark™ vinyl for wrap applications. GF 240 AutoMark™ Premium 2.4 mil calendered matte laminate is specifically engineered for use in most vehicle wrap and decal applications.
Mactac MACmark 6300 Metallics Enhancers
Metallic Enhancer film 6300 is a premium 2.5-mil (Crystal) and 3.0-mil (Silver metallic flake) cadmiumfree clear cast vinyl with high gloss and a high concentration of light refracting additives for a glistening appearance on the surface of your substrate or to use as an overlaminating film to greatly enhance your high quality graphics. These Mactac films are designed for high profile applications over flat to slightly curved surfaces. The products are coated with a high-performance permanent, clear solvent acrylic adhesive protected with 78# bleached white kraft liner for good stability and layflat.
Continental Grafix ProtectWalk
Mactac LUV 800 Series Overlaminating Films
The LUV 8000 Series overlaminating films are a family of high performance pressure sensitive adhesive coated, clear overlaminating films designed to be laminated to:
- Photographic prints
- Transparencies
- UV and Solvent screen printed images
- Solvent and eco-solvent inkjet prints
- HP Latex inkjet prints UV inkjet prints*
- Water-based inkjet prints Canon UVgel 356 prints
*LUV laminates are specifically designed to immediately wet-out over UV inkjet prints
LUV8000 series imparts protection from abrasion, moisture and other potentially damaging effects in both indoor and outdoor environments. And they are available in a variety of surface finishes. LUV 8300 is a luster finished vinyl film coated on one side with a clear high tack acrylic pressure sensitive
adhesive. An easily removed 58# white kraft liner protects the adhesive. LUV 8300 provides a uniform, high gloss surface that protects from abrasion, moisture and other potentially damaging effects. With UV inhibitors built in, it also helps retard color fade caused by ultra violet (UV) light exposure.
Avery DOL2060 Gloss
DOL 2000 Series
Protective overlaminate film for screen and digitally printed graphics on flat or simply curved surfaces.
Premium calendered overlaminates, Avery Dennison® DOL 2000 Series films are ideal for flat to simple curve applications. Choose from three finishes suited for trade shows, retail graphics, bus shelters and other advertising.
