Shop
Showing 1–16 of 62 results
Keencut SteelTrak Cutters
Cutting and finishing the toughest materials in a single action
The SteelTrak gives you the flexibility to cut anything from PVC foamboard to steel composite panels.
It’s more accurate, consistent, and reliable than any other machine on the market. In a single movement, you can slice easily through the toughest materials to leave a smooth edge with no need for extra finishing.
Its unique features will speed up your production, whilst guaranteeing a perfect cut every time.
The SteelTrak is the essential tool for a high-volume production unit.
Keencut Excalibur 3S 160cm – 63″
The Excalibur 3S is a premium cutting machine with exceptional return on investment. It is ideal for those who do not need the heavy production features of the SteelTrak.
The Excalibur 3S is suited to the regular cutting of light and medium-weight boards and can also cut tough materials including 3mm (3/32″) aluminium composite panels.
Simple alignment and permanently mounted blades guarantee a fast and accurate finish. Its unique features will allow you to improve quality, reduce waste and increase productivity.
Keencut Evolution3 Smartfold Cutters
The ultimate cutting tool for the busy production environment
Designed for the busiest production facility, the Evolution3 SmartFold includes all the superior features of the Evolution3 range with the addition of an integral cutting strip for textiles and fragile materials.The SmartFold can be folded down to clear the bench and then returned in seconds to be immediately ready for use.Keencut’s unique Lift-and-Hover (patent pending) technology enables fast single-handed, and accurate alignment of all material, irrespective of thickness. Lower the clamping bar until it hovers just above the material surface with zero sag, even on the longest 3.6m (142″) length cutter, then use the sightline strip to see where the cut will be made, and finally, fully engage the clamp and cut – it’s so simple.
Keencut Evolution3 Benchtop Cutters
Single handed, fast and accurate cuttingPermanently installed for immediate use, the Evolution3 BenchTop is perfect for a busy studio or high use production environment. Keencut’s unique Lift-and-Hover (patent pending) technology enables single-handed, fast and accurate alignment of all material, irrespective of thickness. Lower the clamping bar and it hovers just above the material surface with zero sag, even on the full length 5.5m (216″) cutter. Use the sightline strip to see where the cut will be made, then fully engage the clamp – it’s so simple.You can rapidly change the QuikSwap heads to provide general cutting, creasing or fabric cutting, and you are always guaranteed ultra-high 0.2mm (0.008″) precision accuracy with every cut.
Sabre Series 2 Cutters
- The versatile cutter designed for safety and accuracy
- The Sabre Series 2 is a genuine all round cutter bar that will slice through 13mm (1/2″) thick foamboard or trim tissue paper gently.
- It is perfect for the print shop, workshop, studio, architects’ practice, or educational institution.
- It’s simple to use, incredibly versatile and purposely designed for your safety.
Keencut Evolution3 FreeHand Cutters
Evolution3 accuracy in a portable cutterThe Evolution3 FreeHand has been designed for those who require the high precision accuracy and superior cutting quality of the Evolution3 range but in a more flexible format.It is perfect for a workshop where the cutter bar is required to move between workbenches. Evolution3 FreeHand gives you all the benefits of the QuikSwap cutting tools, sightline strip accuracy and anti-sag design in a portable cutter.
Mactac IMAGin STX1528
Adhesive Type: Permanent Solvent Acrylic
Brand Name: IMAGin
Color: White
Films: Stabilized White T/C PEStreetTRAX is an up to 1 year, 13.5 mil, non-skid, printable, clear grit coated outdoor stabilized white film. This product is designed for the production of outdoor sidewalk and parking lot ‘floor’ graphics. StreetTRAX is designed to be directly printed onto the grit coated surface with Solvent, eco-solvent, UV, UV-gel and latex inkjet printing. The product is coated on one side with 2 mils of an aggressive, permanent, pressure sensitive adhesive that bonds extremely well to flat or slightly rough surfaces like concrete and asphalt.
Mactac PermaFlex IP6000 Lustex
The PermaFlex overlaminating films is a family of relatively thick films that are coated with pressure sensitive adhesive on one side. These unique films can be laminated to either one or both sides of photographic prints, transparencies and digital images (inkjet, electrostatic, and thermal) to impart protection, surface texture and enough rigidity to eliminate the need for mounting to traditional flat substrates in many applications. These laminates also retain enough flexibility to allow images to be used in non-flat configurations such as on cylindrical displays. This feature also permits the laminates to be
rolled for easy shipping or storage. IP6000 is a 15-mil film with a special “Lustex” surface. The low gloss texture helps eliminate glare and provides a very unique and pleasing viewing surface. This product can be used as an overlaminate for indoor as well as outdoor applications. IP6000 not only provides protection from abrasion and moisture,
it also helps retard color fade caused by ultra violet (UV) light exposure. IP6000 exceeds industry standards for slip resistance, when tested according to ASTM D2047
MacTac REBEL Multi-Print Media
REBEL Multi-Print Media
Designed with our customers in mind, REBEL does it all....and then some.
- Printability - REBEL can be printed on multiple print platforms, including:
- Versatility - Available in bright white, matte, and clear finishes. REBEL comes in a variety of roll sizes and widths, custom rolls and sheets available upon request.
- Capability - Covered by the Mactac Open-Image Warranty to guarantee compatibility and durability. REBEL features a 90# Superflat liner.
- Opacity - 99% opacity is built into REBEL 500 series high-performance facestocks, therefore eliminating pigment interference to ensure pure adhesion to the substrate.
- Quality - Consistently good quality, priced with value and warranted with leading third party screen ink manufacturers.
Designed with our customers in mind, REBEL does it all....and then some.
- Printability - REBEL can be printed on multiple print platforms, including:
- UV, UV gel and solvent screen printing
- UV inkjet, flexo and offset printing
- Solvent, eco-solvent, latex printing
- Jetrion printing
- Thermal transfer printing
- Versatility - Available in bright white, matte, and clear finishes. REBEL comes in a variety of roll sizes and widths, custom rolls and sheets available upon request.
- Capability - Covered by the Mactac Open-Image Warranty to guarantee compatibility and durability. REBEL features a 90# Superflat liner.
- Opacity - 99% opacity is built into REBEL 500 series high-performance facestocks, therefore eliminating pigment interference to ensure pure adhesion to the substrate.
- Quality - Consistently good quality, priced with value and warranted with leading third party screen ink manufacturers.
MACmark Glass Décor 700
54″ x 150′ MACtac StreetRAP PSA Vinyl
Adhesive Category: High Tack
Adhesive Type: Permanent BlendBrand: IMAGinBrand Name: IMAGinColor: White
Dimensions: 54" x 150'
IMAGin StreetRap is a 4.0 mil print media film designed for short-term outdoor sidewalk graphic applications on concrete, asphalt and other smooth to moderatly textured surfaces.
Adhesive Type: Permanent BlendBrand: IMAGinBrand Name: IMAGinColor: White
Dimensions: 54" x 150'
IMAGin StreetRap is a 4.0 mil print media film designed for short-term outdoor sidewalk graphic applications on concrete, asphalt and other smooth to moderatly textured surfaces.
Mactac Rough Rap Wall Graphics
RoughRAP RR100 is a 2.0-mil soft white gloss, highly conformable, cast PVC film optimized ink jet printing. The product is coated on one side with a high tack, permanent, opaque, acrylic
pressure sensitive adhesive and supplied with a 90# polycoated 2-side release liner for excellent
lay-flat. RR100 is specifically designed for direct application onto moderately textured exterior and interior brick walls for an astonishing visual effect! Use of an overlaminate will extend the life of the graphic and allow for easier handling during install and de-install.
Free-Standing Kit for SteelTrak 250cm – 98″
Mactac WindowView
WindowView WV139:
- WV139 is a 6 mil soft white vinyl film with black reverse side and 70% print surface and 30% open area with a 1.4 mm hole diameter for one-way visibility. The product is coated on one side with a removable, clear, acrylic pressure sensitive adhesive and supplied with a 6 mil paper release liner. WV139 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WP129 is a promotional 6-mil soft white vinyl film, coated with a black semi-permanent adhesive and a 60/40 perforation with a 1.6 mm hole diameter and 2.4 mm between holes for one-way visibility. The product is supplied with an 86# stable white kraft liner. WP129 is designed for solvent and eco-solvent ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WV159 is an 8-mil soft white vinyl film with black reverse side and 50% perforated with a 1.5 mm hole diameter for one-way visibility. The product is coated on one side with a semi-permanent, clear, acrylic pressure sensitive adhesive and supplied with a 7-mil film release liner with a clear back laminate. WV159 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
