Shop
Showing 609–624 of 1750 resultsSorted by price: high to low
Avery DOL1460Z 3D Gloss
DOL 1460Z
Previously DOL 1460, DOL 1460Z has been optimized to pair with MPI 1105 Supercast films to ensure the warranted durability.
For the ultimate in conformability, turn to Avery Dennison® DOL 1460Z Gloss film. Our most conformable overlaminate allows vibrant graphics to conform to the most extreme 3D curves, corrugations and crevices without the need for primer. Pair DOL 1460Z with our line of Supercast Digital Films for an outstanding graphic solution.
Ultraflex FabriTac
FabriTac® is a removable, adhesive fabric that may be mounted to any surface and repositioned countless times. FabriTac® will retain its adhesion and leaves no residue. FabriTac® has a unique coating which is quick drying and water resistant. It provides superb quality, color gamut and resolution with solvent, eco-solvent, UV and Latex inks. FabriTac® is designed with unique opaque properties which prevents translucency problems associated with comparable products. Available in widths from 42” – 60”.
IMAGin B-free GRUV Slide-able Vehicle Wrap
GVC929v2BFD is a 2.0 mil gloss white, soft cast PVC film designed for ink jet printing. The product is coated on one side with a Slide-able and repositionable yet quick building, opaque permanent, acrylic pressure sensitive adhesive with air egress technology and supplied with a 90# polycoated liner. GVC929v2BFD is designed for use by experienced applicators for long-term outdoor, vehicle markings on flat, curved, complex and riveted surfaces. Including: vehicle wraps, fleet wraps and bus wraps. Use of the correct overlaminate, RAYZor LF3648G gloss, or LF3638 matte will extend the life of the graphic. This product is NOT intended for small cut lettering applications and small intricate or narrow graphic decals, interior drywall murals, or wet application installation methods.
HP Recycled Removable Adhesive Fabric
Eco-Friendly, Repositionable Adhesive Fabric
Create impactful, high-resolution graphics with our sustainable adhesive fabric. Designed for easy installation and removal, this innovative material effortlessly adheres to a variety of non-porous surfaces without leaving residue. Perfect for dynamic displays, whether it's a captivating wall mural, eye-catching trade show signage, or engaging retail décor.
Committed to environmental responsibility, our fabric is crafted using recycled water bottles and eco-friendly coatings. This sustainable choice reduces waste and minimizes your environmental impact.
Experience the versatility and performance of this exceptional material. Its repositionable adhesive and vivid color reproduction make it an ideal solution for a wide range of indoor and outdoor applications.
Key Features:
- Eco-friendly production using recycled materials
- Repositionable adhesive for easy installation and removal
- High-quality, vibrant image reproduction
- Suitable for various indoor and outdoor applications
- Leaves no residue on non-porous surfaces
Ultraflex IllumiSol BL Film 8.5oz
IllumiSol® BL Film is an 8.5 mil PET film coated on one-side for solvent, eco-solvent and UV printing. IllumiSol’s® unique base film and quick-drying glossy top coat were specifically designed for superior light diffusion resulting in vivid backlit graphics. The back-side of IllumiSol® has a unique lacquer which prevents ink transfer when rolled after printing. Available in widths from 54”-86” on face-out rolls.
Compatibility: Solvent, Eco-Solvent, UV Inks
GF 114 1.0 Mil Clear Polyester Removable Print Mounting Film
GF 114 is a double-coated pressure sensitive 1.0 mil clear polyester film with a permanent adhesive on one side and removable adhesive on the opposite side. It is self-wound on a white 76# paper liner. GF 114 is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The permanent adhesive is exposed when the product is unwound leaving the removable adhesive protected by the liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.
HP 638 Stitch Dye Sublimation Ink 10L
Epson T46C Ink
UltraChrome Dye-Sublimation ink.
Epson UltraChrome DS ink produces an extreme color gamut with improved black density for rich blacks and better tonal transitions and gray scale; provides fast drying times.
(1100ml)
SureColor T2170 24-Inch Wireless Printer
Epson SureColor T2170 24-Inch Wireless Printer Product Highlights
- For a limited time, receive a FREE 1-year Epson Preferred Plus Protection Plan when you purchase a qualifying T-Series SureColor printer.†
- Accurate A1/D-size prints in 43 seconds1
- Large, easy-to-use 4.3" LCD color touchscreen
- High-capacity cartridges; up to 50/80 mL color/Black
- Integrated wireless plus router-free Wi-Fi Direct2
- PrecisionCore® MicroTFP printhead for outstanding clarity
Note: This printer is designed for use with Epson cartridges only, not third-party cartridges or ink.
Ultraflex UltraMesh Plus 8oz
UltraMesh® Plus is an 8 oz. coated, polyester scrim, mesh banner material. The economical light weight material allows 37% air-flow through making it ideal for buildings, stadiums and fence wraps. UltraMesh® Plus may be printed on one side using solvent, eco-solvent, screen printing, latex and UV inks on printers using mesh kits. The product is available with a PVC backer that peels off after printing called Strip Mesh Plus. Available in 126″ and 196″ widths.
GF 790AE – Print-N-Privacy 3.0 mil Light Glass Etch Polymeric Vinyl w/Permanent Adhesive & Air Egress
GF 790AE Print-N-Privacy™ is a 3.0 mil decorative polymeric glass etch vinyl coated with a solvent based permanent acrylic pressure sensitive adhesive on a 90# air-egress (AE) liner. This film can either be applied printed or unprinted for an etched glass visual effect or for use as a privacy film.
The 90# AE liner offers easy dry application properties for large format graphics. GF 790AE accepts a variety of solvent-based, eco-solvent, latex and UV curable inks common to wide format digital printing systems.