Shop
Showing 17–32 of 47 results
Mactac Rough Rap Wall Graphics
RoughRAP RR100 is a 2.0-mil soft white gloss, highly conformable, cast PVC film optimized ink jet printing. The product is coated on one side with a high tack, permanent, opaque, acrylic
pressure sensitive adhesive and supplied with a 90# polycoated 2-side release liner for excellent
lay-flat. RR100 is specifically designed for direct application onto moderately textured exterior and interior brick walls for an astonishing visual effect! Use of an overlaminate will extend the life of the graphic and allow for easier handling during install and de-install.
KALA Laminator Accessories
Accessories for KALA Mistral, Arkane & Atlantic Laminators include the following:
- AX165076 Shaft 65" - 1,65 m Ø 76 mm/3" - Mistral 1650
- AX210076 Shaft 83" -2,10 m- Ø 76 mm/3" - Mistral 2100
- MP601840 Anti-static wire w/ magnets for 1650
- MP621840 Anti-static wire w/ magnets for 2100
- ILCT1650 In Line Cutter with Output Table
- ILCM1650 Additional cutting blade holder (one unit)
- ILCA1650 In Line Cutter for Atlantic
- ILCMA Additional cutting blade holder (one unit) for Atlantic
- REMOTE Remote control for Mistral, Arkane & Atlantic
Mactac WindowView
WindowView WV139:
- WV139 is a 6 mil soft white vinyl film with black reverse side and 70% print surface and 30% open area with a 1.4 mm hole diameter for one-way visibility. The product is coated on one side with a removable, clear, acrylic pressure sensitive adhesive and supplied with a 6 mil paper release liner. WV139 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WP129 is a promotional 6-mil soft white vinyl film, coated with a black semi-permanent adhesive and a 60/40 perforation with a 1.6 mm hole diameter and 2.4 mm between holes for one-way visibility. The product is supplied with an 86# stable white kraft liner. WP129 is designed for solvent and eco-solvent ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WV159 is an 8-mil soft white vinyl film with black reverse side and 50% perforated with a 1.5 mm hole diameter for one-way visibility. The product is coated on one side with a semi-permanent, clear, acrylic pressure sensitive adhesive and supplied with a 7-mil film release liner with a clear back laminate. WV159 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
Mactac MACmark 9700 PRO Translucent
48" x 164'MACal 9700 Pro™ translucent films provide high quality results for lightbox applications, allowing to create signs that stand out from the crowd with memorizing visual impact at any time of the day or night.These soft films are translucent when backlit - for truly vibrant colours - and opaque during daytime so that the signage continues to look good and colorful. High performance from start to finish includes uniform colour reproduction - and you can choose from 31 different colours plus two light diffusion films.A durable permanent acrylic adhesive also ensures very good wet-out for extra clarity. MACal 9700 Pro™ Series is suitable up to 7 years outdoor applications*.
IMAGin B-free GRUV Slide-able Vehicle Wrap
GVC929v2BFD is a 2.0 mil gloss white, soft cast PVC film designed for ink jet printing. The product is coated on one side with a Slide-able and repositionable yet quick building, opaque permanent, acrylic pressure sensitive adhesive with air egress technology and supplied with a 90# polycoated liner. GVC929v2BFD is designed for use by experienced applicators for long-term outdoor, vehicle markings on flat, curved, complex and riveted surfaces. Including: vehicle wraps, fleet wraps and bus wraps. Use of the correct overlaminate, RAYZor LF3648G gloss, or LF3638 matte will extend the life of the graphic. This product is NOT intended for small cut lettering applications and small intricate or narrow graphic decals, interior drywall murals, or wet application installation methods.
IMAGin Bfree Frosted Bubble Free Window Film
IMAGin Bfree Frosted allows for the increased speed of dry application on windows with no air bubbles. Always install with a soft felt sleeve or squeegee using light, even pressure. Intended for printed and unprinted window graphics, privacy screening and internally illuminated signs. If using wet method of application, please use MACmark Glass Décor 700 Series. NOTICE: Frosted V1 and V2 are a close match but you may notice a difference if butted together. V1 will be available until inventory is gone. Check with Customer Service about V1 availability.
Mactac PermaGard SAG Series Anti-Graffiti Films
The PermaGard SAG Series of Superior Anti-Graffiti and window protection films are a family of pressure
sensitive adhesive coated, optically clear, overlaminating films that are available in ‘good, better, best’
quality options.
- SAG 38 (‘good’ option) is a 1.5 mil high gloss and ultra-clear, durable polyester face with excellent graffiti, and UV protection. It has an optically clear, acrylic, pressure sensitive adhesive protected by a 1.5 mil smooth PET film release liner.
- SAG 38 can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, water-based and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, light abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments.
- SAG 38 has perfect optical clarity due to its film liner and therefore can be used as an inexpensive overlaminate for perforated window films.
- SAG 38 also increases the impact resistance of windows. (Note: For safety reasons (emergency exits), it is important to keep some windows unprotected). SAG 38 can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces.
- SAG 38 has good solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners which do not contain grit without damaging the graphic.
Mactac PERMACOLOR GeminiXT Mounting Film
Mactac PermaPrint Mounting Film
MacTac PERMACOLOR ColorTrans
Mactac PF6300 Series Overlaminating Films
PF6300 is a 5-mil clear PVC film with a lustre textured finish to eliminate glare and provide a very unique and pleasing viewing surface. This product can be used as an overlaminate for indoor and outdoor applications and wets out perfectly when used over UV inkjet and screen printed images. PF6300 not only provides protection from abrasion and moisture, it also helps retard color fade caused by ultra violet (UV) light exposure. PF6300 can also be used as a Floor Graphic laminate. It exceeds industry standards for slip resistance, when tested according BS7976-2.
MacTac WallCHALKER
WallCHALKER transforms any surface into a real blackboard ! WallCHALKER™ film is very easy to cut: the screen can be any shape, any size to showcase your message and to catch attention.
Its grainy finish is particularly suitable for writing with solid chalk as well as with liquid chalk markers.
The film can be cleaned very easily using a damp cloth.
Easy to apply because of its 120μm thickness, WallCHALKER film has a high performance, removable adhesive which leaves no residue on the substrate after removal (up to 2 years).
54″ x 150′ IMAGin B-free GRUV
GV729v2BFD Pro is a 2.1-mil soft white gloss, highly conformable, super calendared PVC film designed for solvent-based ink jet printing. The product is coated on one side with repositionable yet permanent, opaque, acrylic pressure sensitive adhesive with air egress technology and supplied with an 80# polycoated 2-side release liner. GV729v2BFD is designed for partial vehicle wraps and for long term indoor and outdoor advertising on flat to complex curved surfaces. Use of RAYZor® and ColorGard™ overlaminates will extend the life of the graphic. This product is NOT intended for small cut lettering applications, small intricate or narrow graphic decals, interior drywall murals, or wet application methods for installation.
