Shop
Showing 17–32 of 83 results
Mactac WindowView
WindowView WV139:
- WV139 is a 6 mil soft white vinyl film with black reverse side and 70% print surface and 30% open area with a 1.4 mm hole diameter for one-way visibility. The product is coated on one side with a removable, clear, acrylic pressure sensitive adhesive and supplied with a 6 mil paper release liner. WV139 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WP129 is a promotional 6-mil soft white vinyl film, coated with a black semi-permanent adhesive and a 60/40 perforation with a 1.6 mm hole diameter and 2.4 mm between holes for one-way visibility. The product is supplied with an 86# stable white kraft liner. WP129 is designed for solvent and eco-solvent ink jet printing for window graphics viewed from one side and “see-through” from the other side.
- WV159 is an 8-mil soft white vinyl film with black reverse side and 50% perforated with a 1.5 mm hole diameter for one-way visibility. The product is coated on one side with a semi-permanent, clear, acrylic pressure sensitive adhesive and supplied with a 7-mil film release liner with a clear back laminate. WV159 is designed for solvent based, ink jet printing for window graphics viewed from one side and “see-through” from the other side.
Ultraflex Normandy Pro FL 13oz
Normandy® Pro FL is a premium 13 oz. banner or billboard material. The material is compatible with solvent, eco-solvent, UV, Latex, and screen printing. With 1000 x 1000 high tenacity yarn construction, this product is one of the strongest 13 oz. substrates available. Normandy Pro FL has a unique face film that produces vibrant and consistent prints and is available in matte finish. Available in widths from 98” – 196”. In widths of 80” and below, the product is called JetFlex® FL.
Ultraflex AquaFlex (63″ x 75′)
AquaFlex® is a solvent, UV, UV screen printing and Latex printable substrate designed for underwater branding and advertising for pools, ponds, water features and aquascapes. To protect inks underwater, UV liquid lamination is recommended. Once printed, AquaFlex® may be positioned easily by hand or with a pool brush with no need to drain the water. The product is engineered to lay flat and remain in position without the use of tape or adhesive. AquaFlex® is made in the USA and is recyclable. The blue backside of AquaFlex® is made from recycled industrial pool liner. AquaFlex is available in 63” wide face-out rolls.
Mactac MACmark 9700 PRO Translucent
48" x 164'MACal 9700 Pro™ translucent films provide high quality results for lightbox applications, allowing to create signs that stand out from the crowd with memorizing visual impact at any time of the day or night.These soft films are translucent when backlit - for truly vibrant colours - and opaque during daytime so that the signage continues to look good and colorful. High performance from start to finish includes uniform colour reproduction - and you can choose from 31 different colours plus two light diffusion films.A durable permanent acrylic adhesive also ensures very good wet-out for extra clarity. MACal 9700 Pro™ Series is suitable up to 7 years outdoor applications*.
Ultraflex SuperPrint Plus FL 13oz Matte
SuperPrint® Plus FL is a 13 oz. front-lit billboard and banner material. It is compatible with solvent, eco-solvent, UV and screen printing. The face-film provides exceptional ink receptivity and consistently prints from batch to batch. SuperPrint® Plus is available in matte and gloss finishes and is available in widths from 38” – 196”. The material also comes in 492’ rolls specifically engineered for HP Turbojet and screen-printing machines. The rolls are available in 38”, 54”, 63” widths and are wound face-out on a 3” core.
Ultraflex SuperPrint Plus Eclipse FL 13oz
SuperPrint® Plus Eclipse® FL is the black-backed version of our SuperPrint® Plus FL. The 13 oz. material is engineered for open-framed billboard systems or any application where complete opacity is required. The material is available in a matte finish. SuperPrint® Plus Eclipse® has all the features of SuperPrint® Plus including a 1000 x 1000 scrim construction which not only makes it strong but also allows the material to lay flat when tensioned around a billboard. Available in widths from 126” – 196”.
UltraFlex MultiTex S285 Canvas
MultiTex® S285 is a multi-purpose canvas made from 100% polyester spun yarn. The unique construction and coating make it an economical choice for fine art reproduction, indoor displays, wall murals and other art decor applications. MultiTex® S285 may be stretched and framed. Available in widths from 39”- 126”.
Ultraflex SuperSmooth PET Blockout 15oz
SuperSmooth™ PET Blockout is a 15 oz. smooth, scrimless, blockout banner material. This media is engineered primarily for indoor use and has a no curl formula giving it a lay-flat appearance without having to use hemming tapes. The blockout layer in SuperSmooth™ PET Blockout is made of matted PET, which allows for easier separation during the recycling process. It is best suited for double sided signs and banners that hang or are installed in banner stands. Available in widths from 38″ – 126”.
IMAGin B-free GRUV Slide-able Vehicle Wrap
GVC929v2BFD is a 2.0 mil gloss white, soft cast PVC film designed for ink jet printing. The product is coated on one side with a Slide-able and repositionable yet quick building, opaque permanent, acrylic pressure sensitive adhesive with air egress technology and supplied with a 90# polycoated liner. GVC929v2BFD is designed for use by experienced applicators for long-term outdoor, vehicle markings on flat, curved, complex and riveted surfaces. Including: vehicle wraps, fleet wraps and bus wraps. Use of the correct overlaminate, RAYZor LF3648G gloss, or LF3638 matte will extend the life of the graphic. This product is NOT intended for small cut lettering applications and small intricate or narrow graphic decals, interior drywall murals, or wet application installation methods.
Ultraflex AdventureScapes High Tac
AdventureScapes is a 100% polyester, anti-microbial, adhesive backed material with an anti-slip embossment. The product is ideal for wayfinding, floor graphics, decals in indoor and outdoor applications. AdventureScapes is tear and wrinkle resistant with an excellent anti-slip rating for wet and dry surfaces. The material does not shrink after printing and is engineered with a quick-drying surface that does not require lamination. AdventureScapes is solvent, eco-solvent, UV & Latex printable. Available in 54” widths.
IMAGin Bfree Frosted Bubble Free Window Film
IMAGin Bfree Frosted allows for the increased speed of dry application on windows with no air bubbles. Always install with a soft felt sleeve or squeegee using light, even pressure. Intended for printed and unprinted window graphics, privacy screening and internally illuminated signs. If using wet method of application, please use MACmark Glass Décor 700 Series. NOTICE: Frosted V1 and V2 are a close match but you may notice a difference if butted together. V1 will be available until inventory is gone. Check with Customer Service about V1 availability.
Ultraflex Wallscapes Plus
Wallscapes™ Plus are commercial grade type II wallcoverings. The materials are quality, durable, flexible materials used for wallcoverings and upscale banner applications. The material is available in four embossment finishes: Bali Hai, Matte, Stardust and Suede. Wallscapes Plus materials are compatible for use with solvent, eco-solvent, UV, Latex and screen printing. Materials may be installed with commercial grade adhesives, sewn or attached with grommets. All materials are available in standard 54″ widths.
Mactac PermaGard SAG Series Anti-Graffiti Films
The PermaGard SAG Series of Superior Anti-Graffiti and window protection films are a family of pressure
sensitive adhesive coated, optically clear, overlaminating films that are available in ‘good, better, best’
quality options.
- SAG 38 (‘good’ option) is a 1.5 mil high gloss and ultra-clear, durable polyester face with excellent graffiti, and UV protection. It has an optically clear, acrylic, pressure sensitive adhesive protected by a 1.5 mil smooth PET film release liner.
- SAG 38 can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, water-based and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, light abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments.
- SAG 38 has perfect optical clarity due to its film liner and therefore can be used as an inexpensive overlaminate for perforated window films.
- SAG 38 also increases the impact resistance of windows. (Note: For safety reasons (emergency exits), it is important to keep some windows unprotected). SAG 38 can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces.
- SAG 38 has good solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners which do not contain grit without damaging the graphic.
Mactac PERMACOLOR GeminiXT Mounting Film
Ultraflex Ultima Pro FL 13oz
Ultima® Pro 13 oz. FL Matte is a smooth, versatile 13 oz. front-lit banner material. It has a unique construction making it ideal for outdoor banner and truck-side applications. Ultima® Pro 13 oz. FL Matte provides an excellent option for printers looking for a strong, high quality, cross-functional substrate. It is compatible with solvent, eco-solvent, UV, Latex and screen printing. Available in widths from 38”- 196”.