Shop
Showing 33–48 of 91 results
Ultraflex AdventureScapes High Tac
AdventureScapes is a 100% polyester, anti-microbial, adhesive backed material with an anti-slip embossment. The product is ideal for wayfinding, floor graphics, decals in indoor and outdoor applications. AdventureScapes is tear and wrinkle resistant with an excellent anti-slip rating for wet and dry surfaces. The material does not shrink after printing and is engineered with a quick-drying surface that does not require lamination. AdventureScapes is solvent, eco-solvent, UV & Latex printable. Available in 54” widths.
IMAGin Bfree Frosted Bubble Free Window Film
IMAGin Bfree Frosted allows for the increased speed of dry application on windows with no air bubbles. Always install with a soft felt sleeve or squeegee using light, even pressure. Intended for printed and unprinted window graphics, privacy screening and internally illuminated signs. If using wet method of application, please use MACmark Glass Décor 700 Series. NOTICE: Frosted V1 and V2 are a close match but you may notice a difference if butted together. V1 will be available until inventory is gone. Check with Customer Service about V1 availability.
Ultraflex Wallscapes Plus
Wallscapes™ Plus are commercial grade type II wallcoverings. The materials are quality, durable, flexible materials used for wallcoverings and upscale banner applications. The material is available in four embossment finishes: Bali Hai, Matte, Stardust and Suede. Wallscapes Plus materials are compatible for use with solvent, eco-solvent, UV, Latex and screen printing. Materials may be installed with commercial grade adhesives, sewn or attached with grommets. All materials are available in standard 54″ widths.
Mactac PermaGard SAG Series Anti-Graffiti Films
The PermaGard SAG Series of Superior Anti-Graffiti and window protection films are a family of pressure
sensitive adhesive coated, optically clear, overlaminating films that are available in ‘good, better, best’
quality options.
- SAG 38 (‘good’ option) is a 1.5 mil high gloss and ultra-clear, durable polyester face with excellent graffiti, and UV protection. It has an optically clear, acrylic, pressure sensitive adhesive protected by a 1.5 mil smooth PET film release liner.
- SAG 38 can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, water-based and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, light abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments.
- SAG 38 has perfect optical clarity due to its film liner and therefore can be used as an inexpensive overlaminate for perforated window films.
- SAG 38 also increases the impact resistance of windows. (Note: For safety reasons (emergency exits), it is important to keep some windows unprotected). SAG 38 can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces.
- SAG 38 has good solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners which do not contain grit without damaging the graphic.
Mactac PERMACOLOR GeminiXT Mounting Film
Ultraflex Ultima Pro FL 13oz
Ultima® Pro 13 oz. FL Matte is a smooth, versatile 13 oz. front-lit banner material. It has a unique construction making it ideal for outdoor banner and truck-side applications. Ultima® Pro 13 oz. FL Matte provides an excellent option for printers looking for a strong, high quality, cross-functional substrate. It is compatible with solvent, eco-solvent, UV, Latex and screen printing. Available in widths from 38”- 196”.
UltraFlex Wallscapes Wallcovering
Wallscapes™ are commercial grade type II wallcoverings. The materials are quality, durable, flexible materials used for wallcoverings and upscale banner applications. Wallscapes materials are compatible with solvent, eco-solvent, UV, Latex and screen printing. Materials may be installed with commercial grade adhesives, sewn or attached with grommets. All materials are available in standard 54″ widths.
Ultraflex Pole Banner Select 18oz
Pole Banner Select is a double-sided, durable, blockout banner material designed for indoor or outdoor applications. The material offers a matte finish and is ideal for applications where complete opacity is required. Pole Banner Select is compatible with solvent, eco-solvent and UV ink. Available in widths from 38” – 126”.
Ultraflex DSS 12oz Blockout
DSS 12 oz. Blockout is a 12 oz. smooth, two-sided blockout banner material that delivers similar quality printing results on both sides. DSS 12 oz. Blockout is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. It is best suited for indoor applications where complete opacity is required. With its unique, low-curl formula and lay-flat appearance, DSS 12 oz. Blockout is ideal for pop-up or scrolling banner stands, trade show and events graphics, POP, and any hanging banner or sign. Available in widths from 38” – 126”.
Ultraflex DSS Pro 13oz Blockout
DSS 13 oz. Pro Blockout is a two-sided, blockout banner material with a smooth surface. The material offers a broad color gamut with low ink consumption and is ideal for application where complete opacity is required. The material is compatible with solvent, eco-solvent, UV and screen printing. Available in widths from 38” – 126”.
Ultraflex IllumiSol BL Film 8.5oz
IllumiSol® BL Film is an 8.5 mil PET film coated on one-side for solvent, eco-solvent and UV printing. IllumiSol’s® unique base film and quick-drying glossy top coat were specifically designed for superior light diffusion resulting in vivid backlit graphics. The back-side of IllumiSol® has a unique lacquer which prevents ink transfer when rolled after printing. Available in widths from 54”-86” on face-out rolls.
Compatibility: Solvent, Eco-Solvent, UV Inks
Compatibility: Solvent, Eco-Solvent, UV Inks
Ultraflex FabriTac
FabriTac® is a removable, adhesive fabric that may be mounted to any surface and repositioned countless times. FabriTac® will retain its adhesion and leaves no residue. FabriTac® has a unique coating which is quick drying and water resistant. It provides superb quality, color gamut and resolution with solvent, eco-solvent, UV and Latex inks. FabriTac® is designed with unique opaque properties which prevents translucency problems associated with comparable products. Available in widths from 42” – 60”.
Ultraflex ProFlex 12oz Blockout (6″ Core)
ProFlex DSS 12 oz. Blockout is a 12 oz. smooth, two-sided blockout banner material that delivers similar quality printing results on both sides. ProFlex DSS 12 oz. Blockout is compatible for use with solvent, eco-solvent, UV, Latex and screen printing. It is best suited for indoor applications where complete opacity is required. With its unique, low curl formula and lay flat appearance, ProFlex DSS 12 oz. Blockout is ideal for pop up or scrolling banner stands, trade show and events graphics, POP, and any hanging banner or sign.
Ultraflex SuperSmooth PET Backlit
SuperSmooth™ PET BL is a 13.5 oz. smooth, scrimless, flat banner material. It is best suited for backlit light boxes. It is compatible with solvent, eco-solvent, UV and screen printing. With its curl-free and super flat characteristics, SuperSmooth™ PET Backlit is ideal for any indoor or outdoor backlit applications. Available in widths from 54” – 126”.
Ultraflex Speaker Mesh 7oz
Speaker Mesh is a 7 oz. PVC coated polyester mesh. Speaker Mesh is printable on two-sides using solvent, eco-solvent, and UV inks. The large-holed mesh allows 70% air-flow through. It is designed with a special scrim pattern that runs through the open holes catching more ink for optimal ink coverage. Speaker Mesh is best suited for acoustical applications (over concert/venue speakers), enormous images on building/stadium wraps, murals, protective barriers for scaffolding. It is well-suited for theatrical and TV backdrops. Available in seamless wide-widths of 126” and 196”.
Ultraflex VorTex Flag D110
VorTex™ Flag D110 is a knitted flag fabric treated specifically for direct dye-sublimation, Latex, dye-sublimation transfer and UV printing. VorTex™ Flag D110 offers excellent bleed through and wind flow characteristics making it an ideal choice for flag displays and temporary outdoor banners. VorTex™ Flag D110 is fire resistant and available in widths of 126”.