Laminates
Showing 1–16 of 25 results
Mactac Rough Rap Wall Graphics
RoughRAP RR100 is a 2.0-mil soft white gloss, highly conformable, cast PVC film optimized ink jet printing. The product is coated on one side with a high tack, permanent, opaque, acrylic
pressure sensitive adhesive and supplied with a 90# polycoated 2-side release liner for excellent
lay-flat. RR100 is specifically designed for direct application onto moderately textured exterior and interior brick walls for an astonishing visual effect! Use of an overlaminate will extend the life of the graphic and allow for easier handling during install and de-install.
IMAGin B-free GRUV Slide-able Vehicle Wrap
GVC929v2BFD is a 2.0 mil gloss white, soft cast PVC film designed for ink jet printing. The product is coated on one side with a Slide-able and repositionable yet quick building, opaque permanent, acrylic pressure sensitive adhesive with air egress technology and supplied with a 90# polycoated liner. GVC929v2BFD is designed for use by experienced applicators for long-term outdoor, vehicle markings on flat, curved, complex and riveted surfaces. Including: vehicle wraps, fleet wraps and bus wraps. Use of the correct overlaminate, RAYZor LF3648G gloss, or LF3638 matte will extend the life of the graphic. This product is NOT intended for small cut lettering applications and small intricate or narrow graphic decals, interior drywall murals, or wet application installation methods.
Mactac PermaGard SAG Series Anti-Graffiti Films
The PermaGard SAG Series of Superior Anti-Graffiti and window protection films are a family of pressure
sensitive adhesive coated, optically clear, overlaminating films that are available in ‘good, better, best’
quality options.
- SAG 38 (‘good’ option) is a 1.5 mil high gloss and ultra-clear, durable polyester face with excellent graffiti, and UV protection. It has an optically clear, acrylic, pressure sensitive adhesive protected by a 1.5 mil smooth PET film release liner.
- SAG 38 can be laminated to photographic prints, transparencies, latex, solvent-, eco-solvent, water-based and UV inkjet prints, and UV screen printed images to impart superior protection for your graphics from graffiti, light abrasion, UV light degradation, dirt, moisture and many other potentially damaging effects in both indoor and outdoor environments.
- SAG 38 has perfect optical clarity due to its film liner and therefore can be used as an inexpensive overlaminate for perforated window films.
- SAG 38 also increases the impact resistance of windows. (Note: For safety reasons (emergency exits), it is important to keep some windows unprotected). SAG 38 can be wet applied directly to windows and mirrors or first laminated to a pressure sensitive print media and then applied onto flat surfaces.
- SAG 38 has good solvent resistance, so if tagged, the graffiti can be easily cleaned off using most commercially available graffiti removing cleaners which do not contain grit without damaging the graphic.
Mactac PF6300 Series Overlaminating Films
PF6300 is a 5-mil clear PVC film with a lustre textured finish to eliminate glare and provide a very unique and pleasing viewing surface. This product can be used as an overlaminate for indoor and outdoor applications and wets out perfectly when used over UV inkjet and screen printed images. PF6300 not only provides protection from abrasion and moisture, it also helps retard color fade caused by ultra violet (UV) light exposure. PF6300 can also be used as a Floor Graphic laminate. It exceeds industry standards for slip resistance, when tested according BS7976-2.
54″ x 150′ IMAGin B-free GRUV
GV729v2BFD Pro is a 2.1-mil soft white gloss, highly conformable, super calendared PVC film designed for solvent-based ink jet printing. The product is coated on one side with repositionable yet permanent, opaque, acrylic pressure sensitive adhesive with air egress technology and supplied with an 80# polycoated 2-side release liner. GV729v2BFD is designed for partial vehicle wraps and for long term indoor and outdoor advertising on flat to complex curved surfaces. Use of RAYZor® and ColorGard™ overlaminates will extend the life of the graphic. This product is NOT intended for small cut lettering applications, small intricate or narrow graphic decals, interior drywall murals, or wet application methods for installation.
110 – Commercial Grade Dry Erase
Mactac Simply Sustainable PET/PP Films
MacTac PERMACOLOR PermaGard Shield
Get peace of mind with PermaGard® Shield™ antimicrobial films. Designed to help protect high-touch areas and graphic images.Innovative antimicrobial adhesive films can be used in a vast number of applications, including:
- Keypads/touch screens
- Office environments; i.e. clear safety barriers, high-touch areas
- Gyms and schools
- Kiosks and ATMs
- Countertop and point-of-purchase (POP) displays
- Entertainment venues; i.e. casinos, museums, sports venues, theme parks
- Public transit stations/transportation (bus, train, etc.) and airport/plane/airline safety
- Public restrooms and other public settings
- Healthcare and retail settings
- Distribution center
- Multi-family housing
- Graphic protection; i.e. inkjet prints, screenprints, photographic prints, transparencies
Mactac LUV 800 Series Overlaminating Films
The LUV 8000 Series overlaminating films are a family of high performance pressure sensitive adhesive coated, clear overlaminating films designed to be laminated to:
- Photographic prints
- Transparencies
- UV and Solvent screen printed images
- Solvent and eco-solvent inkjet prints
- HP Latex inkjet prints UV inkjet prints*
- Water-based inkjet prints Canon UVgel 356 prints
